Trigger 62 Description
Sequence: All
Trigger 62 (RTE and SPB 82.95)
Trigger 62 is identical to Trigger 58 except that it is targeting a bit
rate of 25Kb/s. This is done purposely to demonstrate the data throttling
capability. Note that HF-WBR triggers stop WBR about every minute long
enough to collect an HFR Analysis packet.
Trigger 62 Overview
__ ________ _____ ________ ___________ __ _____ ___________
| | | | | | | | | | |
|32| 3E |34| 40 |36| 3E | 38 | 3C |3A| 40 |
|__|________|__|__ _____|__|__ __ _|__ __|_____|__|__ _____|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
0 1 2 3 4 5 6
0 0 0 0 0 0 0
Time in Minutes
Step Receiver Frequency Duration
--------- -------- ----------- --------
Trigger 32 HF-WBR 8MHz 3 minutes
Trigger 3E HF WFR 2.5KHz 9 minutes
Trigger 34 HF-WBR 1MHz 3 minutes
Trigger 40 LF WFR 40Hz 9 minutes
Trigger 36 HF-WBR 125KHz 3 minutes
Trigger 3E HF WFR 2.5KHz 9 minutes
Trigger 38 HF WBR 80 KHz 6 minutes
Trigger 3C Blast-HFR 6 minutes
Trigger 3A LF WBR 10 KHz 3 minutes
Trigger 40 LF WFR 2.5KHz 9 minutes
Receiver Frequency Range Sensor Cycle Time Snapshot Size
-------- --------------- ---------------- ---------------- -------------
LFR 1Hz-25Hz EX,BX 32.000 Seconds
MFR 25Hz-12KHz EW,BZ 32.000 Seconds
Millisec 8.025MHz EX 2.500 Seconds 2048
WFR 50Hz-2.5KHz EX,EW,BX,BY,BZ 20.000 Seconds 2048
WBR 1KHz-80KHz HF 0.250 Seconds 4096
Correlations Channels Integ. Size Frequency
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------
ABC 2E y y 16 n 1000 1 3.6-319KHz
HF1 2E n y 2 n 80 1 30 50 0.325-1.825MHz
HF2 1E n n 1 n 20 1 72 200 1.825-16.225MHz
Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and
H2 requires 1.461 sec for a total of 7.146 sec per sweep. The hfr
cycle time is 7.375 seconds.