The instrument is assumed to be operating in trigger 28.
Starting in C26, LFDR data was added to this trigger. However, because of the V2.4 software bug, no synchronization of the LFDR data with the WBR data is done. Rather, the WBR data is stopped every 32 seconds to allow the low-band WFR data to run for ~5 seconds. With the delivery of V2.5 flight software, it will be possible to run the WBR during the low-band WFR data acquisition. However, the WBR snapshot size will be limited to 2048 samples, and DCC compression will have to be turned off. Command Byte Count: 6 Valid Command Count: 69
Receiver Frequency Range Sensor Cycle Time Snapshot Size
-------- --------------- ---------------- ---------------- -------------
LFR 1Hz-25Hz EX,BX 32.000 Seconds
MFR 25Hz-12KHz EW,BZ 32.000 Seconds
HFR 3.6KHz-16MHz EX,EW 7.375 Seconds
WBR 1KHz-80KHz EX 0.125 Seconds 2048
Correlations Channels Integ. Size Frequency
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------
ABC 2E y y 16 n 1000 1 3.6-319KHz
HF1 2E n y 2 n 80 1 30 50 0.325-1.825MHz
HF2 1E n n 1 n 20 1 72 200 1.825-16.225MHz
Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and
H2 requires 1.461 sec for a total of 7.146 sec per sweep. The hfr
cycle time is 7.375 seconds.